HOME OF FIRMWARE DOWNLOAD FREE!

MyPhone My27 Firmware



The firmware is not backup of mine, But i test it to my repair same model and result all is OK, 100% tested result OK revived from a problem a hang on myphone logo, The Tools may use is not Free you can buy it and activate, This Tool is one of commonly used to more android device now on my Cellphone repair shop
The Logs of Chinese miracle II Tool-SPD on below

My27 Firmware Info Logs of Chinese miracle II (SPD Tool)

Device Brand   : MyPhoneMY27
Device Model   : MyPhoneMY27
Device CPU     : sp7731gea_hdr
Device IntName : sp7731gea_hdrplus_dt
Device Version : 5.1
Device Compile : 11/21/2015 3:50:52 AM
Device Project : SB5081_MY27_20151121_V1.13
Device ExtInfo : MyPhoneMY27


File Info
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : MyPhoneMY27
Device Model   : MyPhoneMY27
Device CPU     : sp7731gea_hdr
Device IntName : sp7731gea_hdrplus_dt
Device Version : 5.1
Device Compile : 11/21/2015 3:50:52 AM
Device Project : SB5081_MY27_20151121_V1.13
Device ExtInfo : MyPhoneMY27


Operation : Flash [ v1.24 ]

======= Flash
Files set for flashing : 
[ MCU ] : SC77xx Infinity Package

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

[FL] : Enabled NVM update. Will program all NVM images found in FW !


PMTManager : Load 0x17 records
PMTManager : PMT Update Ok!
Flashing now

Update BootCode : u-boot-spl-16k.bin
Write Data ... 
Write Data Ok!
Update BootCode : u-boot.bin
Erase block ... 
Block erase Ok!
Write Data ... 
Write Data Ok!
Write FSImage : prodnv.img
Write Data ... 
Write Data Ok!
Write CodeData : sc7731g_CP0_modem.bin
Write Data ... 
Write Data Ok!
Write CodeData : DSP_DM_Gx.bin
Write Data ... 
Write Data Ok!
Update NVM image : nvitem_w.bin
Update NVM Data Ok!
Erase Block : RuntimeData
Erase block ... 
Block erase Ok!

Write CodeData : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
Write Data ... 
Write Data Ok!
Update NVM image : nvitem_wcn.bin
Update NVM Data Ok!
Erase Block : RuntimeData
Erase block ... 
Block erase Ok!
Write CodeData : logo_480x854.bin
Write Data ... 
Write Data Ok!
Write CodeData : fblogo_480x854.bin
Write Data ... 
Write Data Ok!
Write CodeData : boot.img
Write Data ... 
Write Data Ok!
Write FSImage : system.img
Write Data ... 
Write Data Ok!
Write FSImage : cache.img
Write Data ... 
FSImage : Make and Flush SPImage
Write Data Ok!
Writ CodeData : recovery.img
Write Data ... 
Write Data Ok!
Process : Flush
Flush Ok!
Write FSImage : userdata.img
Write Data ... 
FSImage : Make and Flush SPImage
Write Data Ok!
Elapsed: 00:06:45
Reconnect Power/Cable!
After flashing reconnect the battery and power on, I wait takes 2-3 minutes still in LOGO dancing on screen.
and be patience for a minute until welcome menu appear and ready for use again the device.

Firmware information and download

Firmware Type : (SC.pac) Chinese miracle II backup ROM
Firmware size: 550mb Rar file
Firmware Download:  LINK1 / LINK2 credit to uploader

Firmware Password:
SP7731GEA_HDR_MyPhoneMY27_5.1_TMbrodhorse_MY27_20151121_V1.13_MyPhoneMY27

Question? 
What tools i use if i don't have Chinese miracle II dongle (CM2)?
Answer : I ready to help anyone to convert it to PAC file image to use flash to research downloader, Contact me!
NOTE: Before Writing ROM to your device, Extract the downloaded compressed file and provide given password if asked, Please read first the (How to safe flash/Reprogram your device?) Do it at your own risk, After flashed the device is set automatic in reset condition, All your user data is lost. Make sure you full BACK-UP the device first before to proceed flashing your phone for future purposes.

Feel free tell to Admin about Invalid / Missing Download Link, Admin will FIX problem as soon as posibble... Some question will help you about (How to Download Firmware and password?) You can contact us at a main page with author Gmail,FB for fast response..

Comments

  1. Sir, will you be so kind and help me convert this .SC file to .PAC file so I can use RD to flash my phone.

    Here's the link to the file https://www.4shared.com/rar/G_cj0IZvei/SP7731CEB_sp7731c_1h10_32v4_60.html

    Sir just have patience to download it :-(

    Thank you in advance

    ReplyDelete
  2. no CM2 here sir, can you please help me with this sir? i really need this firmware thank you.

    ReplyDelete
  3. Hello, Try this pacfile repair firmware at https://mega.nz/#!O5cxjDxA!4VLWZ0np1-gv4KQFXF6WrYLf8i15GWRdR8SY0yM7iPo
    Br.Admin

    ReplyDelete

Post a Comment

Important Parts Using of Mobile Tech.

Latest Video Post