OPPO Joy Plus Rom Scatter Firmware R1011 / R1011 EX




Hello world,

Today i share the OPPO Joy Plus aka model R1011 / R1011 EX.
The Firmware ROM is back-up as stockrom via (CM2) Chinese Miracle Tool II.
The problem when arrived to my repair shop is hang on OPPO logo, Trying to Hard Reset success but its failed to revived it, Still the hang on Oppo logo problem, Thats why i proceed to update flash via memory card, The procedure and download is this below
Download and procedure update via memory card

R1011/R1011EX_11_A.10_OTA_INT_010_all_160813_logo

You can download and make it update via memory card just follow how to do it provided link.
After success update, the phone ask for reboot and after reboot you must wait for 1-2 minutes and the phone become live again.
After i check all working fine i back-up the Firmware ROM as scatter file via CM2 tools (paid tools)
The Logs below shows the complete backup.


[AP] : Initial info read Ok!
Brand     : OPPO
ProdName  : R1011w
ProdModel : R1011
Device    : R1011
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : R1011EX_11_A.10_160813

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : FE014E50314A39344C1217E786CCC1E9
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , L49J1
[eMMC] : FLASH_CID : FE014E50314A39344C1217E786CCC1E9
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000
[eMMC] : FLASH_LEN : 0x00000000E9800000
[eMMC] : FLASH_UCP : 3736 MiB [eMMC 4 GiB]
DEV RID    : 0xDABB189F46A6EE4C9FF87EF01A87D907
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

Brand     : OPPO
ProdName  : R1011w
ProdModel : R1011
Device    : R1011
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : R1011EX_11_A.10_160813

[Read Ok] : preloader_oppo72_15077.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / oppo72_15077 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1353 MiB
Scatter saved to : C:\Documents and Settings\emerlits\Desktop\CM2 backup\MT6572__OPPO__R1011__R1011__4.4.2__R1011EX_11_A.10_160813\

All done!

Done!
Elapsed: 00:06:21
Reconnect Power/Cable!
----------------

The Scatter Firmware is can use via PC computer about tools that support scatter base firmware like SP flash tool, must better flash it using CM2 MTK paid tools.
Firmware can use to same model about have problem about software related problem Hang, no power, password, pattern lock , infected by virus, anything about software related.
Best safe way is manual select flash the SYSTEM ANDROID file only.
Do it at your own risk, After flashing ! the device is set automatic in reset condition, All user data is lost.
Make sure back-up important data before to proceed flashing your phone.

Download This Firmware

Password Rar

VIEW

1. To Download allow ads pop-up of your browser
2. Wait 5 seconds and press skip button, The new Tab of  browser appear that show your link
3. Subscribe on my blogs
-SUPPORT US TO STAY LIVE AND FREE-
hello!
How to Download Firmware? CLICK ME HOW
Previous
Next Post »
0 Komentar
Adslot Available leaderbord