MyPhone My27 Firmware



The firmware is not backup of mine, But i test it to my repair same model and result all is OK, 100% tested result OK revived from a problem a hang on myphone logo, The Tools may use is not Free you can buy it and activate, This Tool is one of commonly used to more android device now on my Cellphone repair shop
The Logs of Chinese miracle II Tool-SPD on below

My27 Firmware Info Logs of Chinese miracle II (SPD Tool)

Device Brand   : MyPhoneMY27
Device Model   : MyPhoneMY27
Device CPU     : sp7731gea_hdr
Device IntName : sp7731gea_hdrplus_dt
Device Version : 5.1
Device Compile : 11/21/2015 3:50:52 AM
Device Project : SB5081_MY27_20151121_V1.13
Device ExtInfo : MyPhoneMY27


File Info
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : MyPhoneMY27
Device Model   : MyPhoneMY27
Device CPU     : sp7731gea_hdr
Device IntName : sp7731gea_hdrplus_dt
Device Version : 5.1
Device Compile : 11/21/2015 3:50:52 AM
Device Project : SB5081_MY27_20151121_V1.13
Device ExtInfo : MyPhoneMY27


Operation : Flash [ v1.24 ]

======= Flash
Files set for flashing : 
[ MCU ] : SC77xx Infinity Package

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!

[FL] : Enabled NVM update. Will program all NVM images found in FW !


PMTManager : Load 0x17 records
PMTManager : PMT Update Ok!
Flashing now

Update BootCode : u-boot-spl-16k.bin
Write Data ... 
Write Data Ok!

Update BootCode : u-boot.bin
Erase block ... 
Block erase Ok!
Write Data ... 
Write Data Ok!

Write FSImage : prodnv.img
Write Data ... 
Write Data Ok!

Write CodeData : sc7731g_CP0_modem.bin
Write Data ... 
Write Data Ok!

Write CodeData : DSP_DM_Gx.bin
Write Data ... 
Write Data Ok!

Update NVM image : nvitem_w.bin
Update NVM Data Ok!

Erase Block : RuntimeData
Erase block ... 
Block erase Ok!

Write CodeData : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
Write Data ... 
Write Data Ok!

Update NVM image : nvitem_wcn.bin
Update NVM Data Ok!

Erase Block : RuntimeData
Erase block ... 
Block erase Ok!

Write CodeData : logo_480x854.bin
Write Data ... 
Write Data Ok!

Write CodeData : fblogo_480x854.bin
Write Data ... 
Write Data Ok!

Write CodeData : boot.img
Write Data ... 
Write Data Ok!

Write FSImage : system.img
Write Data ... 
Write Data Ok!

Write FSImage : cache.img
Write Data ... 
FSImage : Make and Flush SPImage
Write Data Ok!

Write CodeData : recovery.img
Write Data ... 
Write Data Ok!

Process : Flush
Flush Ok!

Write FSImage : userdata.img
Write Data ... 
FSImage : Make and Flush SPImage
Write Data Ok!


Elapsed: 00:06:45

Reconnect Power/Cable!
After flashing reconnect the battery and power on, I wait takes 2-3 minutes still in LOGO dancing on screen.
and be patience for a minute until welcome menu appear and ready for use again the device.

Firmware information and download

Firmware Type : (SC.pac) Chinese miracle II backup ROM
Firmware size: 550mb Rar file
Firmware Download : LINK credit to uploader
Firmware Password : SP7731GEA_HDR_MyPhoneMY27_5.1_TMbrodhorse_MY27_20151121_V1.13_MyPhoneMY27

Question? 
What tools i use if i don't have Chinese miracle II dongle (CM2)?
Answer : I ready to help anyone to convert it to PAC file image to use flash to research downloader, Contact me!
DOWNLOAD NVRAM FIRMWARE
DOWNLOAD DRIVERS Extract the downloaded compress file using 7 ZIP or winrar and provide given password if asked, Do it at your own risk, After flashing ! the device is set automatic in reset condition, All your user data is lost. Make sure back-up first before to proceed flashing your phone.

ABOUT THIS BLOG PRIVACY POLICY

Previous
Next Post »
3 Blog Comments
avatar

bro how to convert the file?to use research downloder...plz hlp me bro

Reply
avatar

you need CM2 paid Tools to flash this stockrom. If you dont have CM2, i will try upload converted PAC image to flash using research downloader. but i take time to do that! but i will and share it in next day

Reply