Miracle Tools 2.27A Tutorial Mediatek TAB

The Tutorial and TUTS that i learn when using Miracle Tools as far i Know, Hope readers can understand for my writing blog, I hope its helps.

Prepared the Following before you start program your smartphone

• Be sure you have backup firmware before proceeding flash your phone.
• Be sure you have exact Firmware and version of same model of your phone
• Check your smartphone if the chipset is MediaTek (MTxx)
• You have already Driver installed to your PC You can Read link at  Added Knowledge 1 how to install
• Do not try all of this if your Phones NOT Mediatek Chipset OK!

Figure 1 Sample of proper driver of mediatek smartphone which already installed that will see on device manager of PC

If  you connect the Mediatek chipset smartphone to PC USB port, you will see this preloader driver in 2-4 seconds, then after that it will be gone on connection and the smartphone will start to charging because no more Active tools want need connectivity.

This is normal because preloader driver react only in 2-4 seconds to detect if have a flasher tools active related to MediaTek connectivity.

If have active tools waiting for preloader driver like (Miracle MTK tab, sp flash tool, etc ) see figure below

When the tools detect preloader the Driver switch to the port (VCOM) because It will start to program or what command of tools work, This driver was view when the tools actual sending / recieve data to device.
Up Next tutorial is 

A. How to Write ROM Firmware to Mediatek Devices using MTK Tab

1. Open Miracle exe

• Free Download  and read description about hide start button issue
• Paid Go here

(if free! use loader.exe to execute the tool and be sure disable the antivirus)

2. Go to MTK tab

3. Select a boot number option.

• This boot is option to match the device and Miracle tool booting connection.
• Most common use for android MTxxxx devices is BOOT number 8 which is support range MT6572 to MT67xx chipsets.

4. Tick to write option then browse folder for Backup ROM you download.

5. Hit start Button

6. Connect device via usb PC port.
(be sure you have driver installed), if not run reconnect device while holding both volume button to boot mediatek preloader and repeat 1-6 procedure.

7. Starting flash firmware depend on which file extension will be load..

When start to flash, The tool asking for which image file ROM will be flash to device which is have check mark, for safe flash you can flash system or android file only.

8. after complete flash disconnect device and battery the check phone status, if device hang on startup in more minutes, make it Hard Reset via recovery  by formatting userdata and catch or you can direct format userdata and catch using miracle tool by format button

B. How to backup full Rom firmware of MTK Devices

1. Open Miracle_Loader_2.27A.exe

2. Go to MTK tab

3. Goto Boot Select option.

• This boot is option to match the device and Miracle tool booting connection.

Most common use for android MTxxxx devices is BOOT number 8 which is support range MT6572 to MT67xx chipsets.

4.  Tick READ option

•  Select if you want back-up as scatter Firmware (optional) Make check button on Save as scatter file, This backup is for expertise moded ROM.
•  If you not select scatter file, The tools backup full entire address of device as BIN image file and can be write flashback using Miracle tool only.. this is better backup.

5. Hit start Button

6. Connect device via usb PC (be sure you have driver installed), if not run reconnect device while holding both volume button to boot mediatek preloader as see on device manager of PC and repeat 1-6 procedure.

7. when start read flash wait to make said 100% DONE then save your backup ROM

Figure 2 sample backup by scatter file  backup

C : How to format userdata and catch ( hard reset) using Miracle Tool Mediatek chipsets?

NOTE : (I encountered Some device after Format will result dead device, Make sure backup Phone firmware and important data before proceed to format.)

1. Open Miracle_Loader_2.27A.exe
2. Go to MTK tab
3. select boot which MTxxxx chipset of device
4. Uncheck safe Mode, Check advance
5. Hit start Button
6. Connect device via usb PC (be sure you have driver installed), if not run reconnect device while holding both volume button to boot mediatek preloader and repeat 1-6 procedure.
7. When start to detect, The tool asking for which image file will be format
8. select userdata and catch only.

D : MTK Tab using Unlock/Fix section

Figure 3



After you know now how to backup/flash the Firmware, This Tutorial is i show to all the most deep power what the miracle tools have standalone Unlock the security of your mobile without clearing your user data.
The color rectangle in figure 3 above show what the setup you use. but first i will give the what usage of  the button in bigger rectangle.

This is not true meaning what the button about , Only in my experience But i kindly explain it what i know how about to use, This TUTS only for beginner and reference Do it at your own risk.

Reset Code button - It will reset security code.

I try it already for many MTK phones but not much better, sometimes it can remove the code! sometimes NOT or after successful remove become hang , i said not all huh! i rate this 5/10

Root button - Rooting MTK Phones

I cannot use this one i have better software Rooting Tools.

Fix DL mode - Fixing Download mode

Very sophisticated to explain, you must be professional technician to understand need time actual problem of device have problem in booting download ^_^ .

Read network Code - is for Unlock network or Openline

You can read netlock code of MTK phones

Read Pattern - Reading pattern lock of MTK phones without clearing data

I try it already for many MTK phones, I recommended this is awesome  i rate it 8/10 you know what i mean this is great.

Miracle AV - for removing virus like  monkey virus

Its is better to removing Virus definition in last year but in Miracle v2.27a free need to buy orig tools to updates new virus today to delete, but try it this tools need to root your MTK phone

Clear anti-theft -  Its can remove Privacy Lock not pattern lock

Fix unknown baseband - Fix and activate baseband  to load IMEI (invalid IMEI)

i try it already for many MTK phones but not much better rate it 5/5 and Very sophisticated to explain, you must be professional technician to understand need time actual problem of device have problem in Invalid IMEI problem but im TECH i know what this problem to fix ^-^

Clear setting /FRP - removing google verification after hard reset if have FRP condition

I cannot use this one i have better software removing Google account verification.