HOME OF FIRMWARE DOWNLOAD FREE!

Samsung J3 clone Firmware SP7731CEB



This SP7731CEB_J3_6.0_MRA58K_release-keys_J3 CM2_emerlits.pac Firmware Rom is back-up using CM2 Spreadtrum tool and already convert to PAC files
For helping others who need this Firmware without CM2 spreadtrum tools FREE!

The PAC files Rom is ready to load to SPD_Upgrade_Tool
which a free tool can be download below post.
The figure image on top picture shows the actual unit of Samsung J3 clone
The firmware was backup using CM2 read/convert to PAC image firmware button.
Here some Logs may viewers will need to understand what Backup ROM about using CM2.

Device Brand   : J3
Device Model   : J3
Device CPU     : sp7731ceb
Device IntName : J3
Device Version : 6.0
Device Compile : 11/15/2016 4:30:57 AM
Device Project : MRA58K release-keys
Device ExtInfo : J3

Logs backup using Cm2 Spreadtrum tool

Phone found! [ 3 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v1.0  
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name  : J3
Model Brand : J3
Model Device: J3
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : MRA58K release-keys
Model Ext   : J3
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : fblogo_540x960.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1890 MiB

I backup as pac.sc and i said before i convert it into PAC file image.

We can use to flash-back this Firmware Rom via PC/laptop and tools that have
PAC image file support load,
Must better use CM2 tools which is back-up this ROM
If you don't have Cm2, You can use try Upgrade Download,
Read more step by step about what Free Tools and download at Link below

⇨ SPD_Upgrade_Tool_R17.0.0001

Be sure you read and understand the information/Version ROM backup Firmware above
and step by step before proceeding to program your device.

Firmware can use to same model about have problem about software related problem Hang, no power, password, pattern lock , infected by virus, anything about software related.

Do it at your own risk,
After flashing ! the device is set to automatic in reset condition,
All your user-data is lost.
Make sure back-up first before to proceed flashing your phone.

Firmware PAC image Size : Firmware Size : 1890 MiB extracted
The file is split into 2 parts because of large file.
Use 7z to extract the ROM
SP7731CEB_J3_6.0_MRA58K_release-keys_J3 CM2_emerlits.7z.001
SP7731CEB_J3_6.0_MRA58K_release-keys_J3 CM2_emerlits.7z.002

7z password
VIEW


Others
⇨ NVRAM Download
Report Broken Link! Admin will try to fix it.

NOTE: Before Writing ROM to your device, Extract the downloaded compressed file and provide given password if asked, Please read first the (How to safe flash/Reprogram your device?) Do it at your own risk, After flashed the device is set automatic in reset condition, All your user data is lost. Make sure you full BACK-UP the device first before to proceed flashing your phone for future purposes.

Feel free tell to Admin about Invalid / Missing Download Link, Admin will FIX problem as soon as posibble... Some question will help you about (How to Download Firmware and password?) You can contact us at a main page with author Gmail,FB for fast response..

Comments

Post a Comment

Important Parts Using of Mobile Tech.

Latest Video Post