Cherry Mobile Flare S3 Octa Firmware Download KitKat 4.4.4

Sponsor Ads

Flasher Tools and Device image 





How To flash : 

Open Sp flash Tool , Load the Scatter file (.txt) , Check all box then press Download
Connect off phone in USB port of computer with battery you will see drivers install as mtk preloader Vcom , you see the bars of sp flash tools percentage counting start .Wait until finish and your done to flash your phone to this firmware.
Thanks to Firmware hub without this i cant repair the boot loop hang on logo of this flare S3 Octa

Steps to flash firmware to device

1st  You need MediaTek drivers for windows if you have not ,go here Phone driver collection and select Mtk USB driver all version.
2nd Download Tools you need to Flash Firmware . Go here at Mobile phone tools and download SP Flash Tool v5.1540.
3rd  Download Stock Firmware Cherry Mobile S3 Octa Firmware here 
http://www.mediafire.com/download/2ks5fcriruggnqz/CM+Flare+S3+Octa+KK4.4.4.rar
password : thefirmwarehub

4th extract all your download
⇩DOWNLOAD NVRAM for Invalid IMEI
Note! Before Writing ROM to device
* HOW TO SAFE FLASH YOUR DEVICE?
* HOW TO DOWNLOAD FIRMWARE?
* ABOUT PRIVACY POLICY/PRECAUTIONS
NOTE: Extract the downloaded compress file and provide given password if asked, Do it at your own risk, After flashed the device is set automatic in reset condition, All your user data is lost.
Make sure you full BACK-UP the device first before to proceed flashing your phone for future purposes.
Previous
Next Post »
1 Komentar
Ads responsive Available Here