CMX model G4 Android mtk6572 Firmware

CMX Model code G4, Clone phone with housing of LG is arrive on my repair shop.
Problem of this device was Hang on Logo on LG.
Android with operating system version 5.1 Lollipop and Build Id : Alps.kk1.mp7.v1.7 found on about device menu appear after finish flash the Firmware.

See actual figure of device below and you find the LG logo on housing and back housing.

You notice the LG phone but maybe its not. Because its MT6572 chips which is Mediatek system.
I will share the Link i used of this file and already scatter file support for using Sp Flash Tool found Here .
Also if you need drivers you can download and select the MTK USB driver all version Here
If you have same unit that same in the picture above, you can use the firmware that i share link
The download firmware is already zero means all is erase user data or its already factory reset.
And i am lucky because the firmware i download have no password.
Now i share the link what i used to this phone below
Do it at your own risk to use it. But for me its 100% tested

Thanks to this Link without this i can't revive the problem of this device
Don"t forget to follow and subcribe below... yes please not to hit and run.
AD Sponsor
Extract the downloaded compress file using 7 ZIP or winrar and provide given password if asked, Do it at your own risk, After flashing ! the device is set automatic in reset condition, All your user data is lost. Make sure full back-up the device first before to proceed flashing your phone for future purposes.

Next Post »
3 Blog Comments

I have a clone LG G4. It comes under the battery overlayed logo "LG", the logo " CMX ". It has suddenly become the logo welcome ( LG ) and would not start. I put the fash posted on your blog , following all steps in the " flash tools" . but now lit with vertical lines . The point is has not fallen or hit . the buttons work , the camera works , LED lights , charging the battery normally , etc. but I can not see anything on the screen. please help me!!


You are follow the steps as a Full flash without backuping UBoot? your phone is same unit on post, but different in version, See the 3rd picture above the about phone picture maybe yours different that's why came problem in screen but same system, anyway if you have backup Uboot system file replace the uboot img that you download to backup your uboot , i tell a secret for my experience of my job when i flash firmware that i dont know the version is 1.FLASH check only SYSTEM data to avoid problem, if prob exist
2. backup first before full flash the phone. if still have problem
3 flash back the backup UBOOT.img,BOOT.img, LGOGO.img only and result ok
if you have dont back-up i have here from same model but different version i hope this is your version


this is a another version but same unit of G4 display blank screen backup flash using sp flashtool

ADS Sponsor