General SP MultiDownloader for Broadcom Device

Sponsor Ads

Broadcom MultiDownloader is a flash burn tool for production line.
 Figure 1: Broadcom MultiDownloader Main GUI

Figure 2: Configuration setting to load the Firmware image.

Little few device phone model uses this kind chipset what called it Broadcom integrated circuit.
But nothing different on using other free tools, The firmware is for whole folder, Example is Your ROM folder

Install the Driver of your Phone (If you have already driver ignore this part)
   Refer this TAB, if you don't have click here and to download Broadcom drivers.
Load the Firmware

1. Select “Setting->Configuration” to enter setting dialog. 2. Image Path: Click “...” button.
3. Select your image folder.

How to download
Double Click open Download tool named Broadcom MultiDownloader.exe
Click  setting tab button
Then will Pop-up dialog box , And select your image folder.
If an up level folder selected, tool will search all image package contained.
And list all packages for your selection 
select Clean whole flash and download all image files. Don’t keep any data.
Take off the phone battery, unplug the USB cable (make sure the phone is fully power off), then put back the battery, connect the USB cable from the phone to the PC.
make sure you have a proper usb install
Pay attention to message inside red box
Assign this USB port number to any DIAG you want.
Then will  see that the tool detects the device and start flashing the Diag Color will change to yellow.
The Diag color is green means finish.

NOTE: Extract the downloaded compress file and provide given password if asked, Do it at your own risk, After flashed the device is set automatic in reset condition, All your user data is lost.
Make sure you full BACK-UP the device first before to proceed flashing your phone for future purposes.
Next Post »