Cherry Mobile Flare S100 Firmware Rom

This Cherry Mobile Flare S100 Firmware Rom was i used to said device with the problem of blank screen status when costumer arrived on my shop.
The Firmware is stock ROM, A Qualcomm firmware that shows info below.

Model : S100 Cherry_flare_V006031
OS      : Android 4.1.2
Kernel : 3.4.0
Chipset : Qualcomm MPRG8X25

This chipset is work only in QPST or other Oualcomm tools support, But i share a free tool that can be flash phone via Fastboot mode.
Kindly check first if your S100 have fastboot and recovery

Basic step before flash your phone

  • If device still have recovery mode try to hard reset, but if problem of software of phone still ? Proceed below-.
  • Try it if have fastboot mode, Press power on button + Volume Up together untill see green screen display that say "Fastboot" , If not work on many time try to make it fastboot ? This post will not help you.
  • If you successfully make it fastboot the device continue below.

Step and things you may need before you to start flash your Flare S100

1. Download QUALFAST 2.0.5
2. Go to Drivers section and download and Generic Qualcomm Driver
3. Stock Rom Firmware of  Flare S100 Download Me
4. Firmware Rar password View Me

Tutorial steps

  • Extract all you download and place what directory you want.
  • Connect phone via fastboot mode refer read above how to make fastboot.
Install driver manually go to device manager of your PC by browsing the Generic Qualcomm folder you download earlier (important). refer  how to install manual drivers port

After successful installed fastboot Driver reconnect the device and connect again see the device manager if 
have name Android usb debugging , If there proceed now to flash the device

  • Open Qualfast exe
  • Point to SEL_Path button
  • Browse the Firmware folder 592250_8572_V006031
  • Press Ok button and when the tools start to flash wait until it's complete.
  • After that Remove Phone from USB reconnect the battery then power on the phone
  • You must wait 3-5 minutes to ready to use again.

Watch Video Actual flashing S100 via Qualfast and Tutorial

Actual Flash of S100 using qualfast tool
Hope its help

AD Sponsor
Extract the downloaded compress file using 7 ZIP or winrar and provide given password if asked, Do it at your own risk, After flashing ! the device is set automatic in reset condition, All your user data is lost. Make sure full back-up the device first before to proceed flashing your phone for future purposes.

A Smartphone Software repairing

Next Post »
5 Blog Comments

Boss bakit po nung inextract ko Ung firmware Corrupted ung tas ung system.img At ung system_1.unspares?
pwede po bang pakisend na lang Saken ng 3 na un?
eto po email ko

avatar is for mmc update using recovery mode, system .img you nned this to update using qualfast.
Try to extract using winrar, if have an error try 7zip.
if the problem exist maybe you download/upload damage.


Ano po Solusyon pag nag-failed Ang pag flash?
Sinunod ko nMn po Ang tut nyu Sa Video


nagrerestart po Sya After ko i-flash


Try to hard reset using recovery, when screen goes color red it means you are in recovery mode (Volume up +power on), select delete data and catch

ADS Sponsor