HOME OF FIRMWARE DOWNLOAD FREE!

Tablet S108 7730 d2 (168)-v1.0 (898-JFT-S108 7730 d2) Firmware

Firmware Information

Motherboard  : S108 7730 d2 (168)-v1.0
Device Model   : 898 Tablet
Device CPU     : sp5735c2ea Spreadtrum
Device IntName : 898
Device Version : 4.4.2 Android
Device Compile : 9/19/2016 2:49:56 AM
Device Project : YK-706-ZX7730-MIPI30P_ZHZH-121DU-FLB_SZ-898-JFT-20160919
Device ExtInfo : 898

Motherboard Screenshot



Logs backup

- > Wait phone connected ...
Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name  : 898
Model Brand : Spreadtrum
Model Device: 898
AndrVersion : 4.4.2
BaseBand CPU: SP5735C2EA
Project Ver : YK-706-ZX7730-MIPI30P_ZHZH-121DU-FLB_SZ-898-JFT-20160919
Model Ext   : 898
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc8830_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830_modem_CP2_WCN_14C_W15.23_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : fblogo_1024x600.bin
[Read Ok] : customlogo.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1066 MiB

The Firmware File extension is Pac.sc which is can load only to flash back using CM2 Spreadtrum tool.
If  Visitor wants it to convert to PAC file, I will convert it and upload with convert file but this is Take time to do that and I'm happy for your donation ^_^.
Also, the Firmware is Stockrom and totally factory reset before I back up.

Be sure you read and understand the information Device Project/Version ROM backup Firmware and step by step before proceeding to program your device to avoid problem after flashed, Make sure back-up First before to proceed to flash your phone.
Note: Download the 2 links below and extract it in one folder
898-JFT-S108 7730 d2
The Comments section on this post was Closed. Reason: The post and ROM were tested by user. Is a result Tested OK. You can use Public chat for your other concern. Thank you for all Who supports this Post. Mail me if There's Invalid Download ROM Address. I will fix it at soon as possible. Br: Admin emerlits Gsm service.
DOWNLOAD:
Primary link Link
NOTE: Before Writing ROM to your device, Extract the downloaded compressed file and provide given password if asked, Please read first the (How to safe flash/Reprogram your device?) Do it at your own risk, After flashed the device is set automatic in reset condition, All your user data is lost. Make sure you full BACK-UP the device first before to proceed flashing your phone for future purposes.

Feel free tell to Admin about Invalid / Missing Download Link, Admin will FIX problem as soon as posibble... Some question will help you about (How to Download Firmware and password?) You can contact us at a main page with author Gmail,FB for fast response..

Comments

  1. SAME MY TAB BORD ID YOUR FRIMWARE INFO ....

    AFTER FLASH DEAD

    ReplyDelete
  2. SAME MY TAB BORD ID YOUR FRIMWARE INFO ....

    AFTER FLASH DEAD

    ReplyDelete
  3. Hello Arshad Waqas and medo zeka! sory to hear that, there is many version release this S108 board,
    Make sure you board is same Device project attach above.
    Anyway this is backup using Cm2, Flash back your backup and use the system.img only on this file (replace old your system.img backup, Hope its help Goodluck!

    ReplyDelete
  4. hi mcjepoy, plz read the post. link Password is on the post name 7z/Rar password.
    Hope it helps

    ReplyDelete

Important Parts Using of Mobile Tech.

Latest Video Post