BLU BOLD LIKE US YHL BLU R1 PLUS FIRMWARE

FIRMWARE INFO
Device preloader v3995.bin
Device Project : alps-mp-m0.mp1-V2.84_tinno6737t.65.m0_P80

Created by Infinity-Box (c) phoenixemer.blogspot.com
Device Brand   : BLU
Device Model   : R1 PLUS
Device CPU     : MT6737M
Device IntName : R1_PLUS
Device Version : 6.0 android
Device Compile : 11/16/2016 12:11:16 PM
Device Project : alps-mp-m0.mp1-V2.84_tinno6737t.65.m0_P80
Device ExtInfo : R1 PLUS

DEVICE SCREENSHOT IN HAND




OTHER INFO REFERENCE
BLU BOLD LIKE US YHL BLU R1 PLUS is backup as scatter file firmware using a Paid tool and can be program-back using any Mediatek tool which support scatter base file like SP flash Tool.



Backup logs using InfinityBox CM2MTK

Operation : Read Flash [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 33 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 484A0190653247414B0B0705A925978C
Initialize Memory ...
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A484147326505070B4B8C9763A9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID    : 0xDABB189FFE6349CF0AE0C49DFFE98273
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
USBDL : Init HSUSB Ok!
xGPT : Normalize settings Ok!

Brand     : BLU
ProdName  : R1_PLUS
ProdModel : R1 PLUS
Device    : R1_PLUS
AndroidVer: 6.0
MTKxCPU   : MT6737M
MTKxPRJ   : alps-mp-m0.mp1-V2.84_tinno6737t.65.m0_P80

[Read Ok] : preloader_v3995.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6737M / V1.1.2 / v3995 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 3231 MiB

Scatter saved to : phoenixemer.blogspot.com
MT6737M__BLU__R1_PLUS__R1_PLUS__6.0__alps-mp-m0.mp1-V2.84_tinno6737t.65.m0_P80\
All done!
Done!
Elapsed: 00:08:46
Reconnect Power/Cable!

Note : Be sure you read and understand the information/Version, project ROM backup Firmware and Screenshot image above is same to your device before writing ROM, Do it at your Own Risk!...

FREE TOOL MAY USE
If you don't have Paid tool you can use scatter base file like SP flash Tool but its not recommended.

Recommend : For newbie safe program is MOTA SU LIKE via
SP Flash Tool.
The tutorial how to program was found at given link.

DOWNLOAD "scatter repair firmware" CM2 ROM
MT6737M_BLU_R1_PLUS_6.0_alps-mp-m0.mp1-V2.84_tinno6737t.65.m0_P80
Link 1
Link 2
Without System file