Chico mobile OJOS 6 HY930A Firmware ROM

TOOL READ FIRMWARE INFO
Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand   : CHICO
Device Model   : HY930
Device CPU     : HY930
Device IntName : HY930
Device Version : 6.0
Device Compile : 3/30/2017 2:18:43 AM
Device Project : HY930A_XLD_H5_CHICO_QHD_V04_20170330
Device ExtInfo : CHICO OJOS 6

DEVICE SCREENSHOT IN HAND


OTHER INFO REFERENCE
CHICO OJOS 6 Firmware android Rom is back-up using CM2 Spreadtrum tool.
The ROM is not back-up of mine but i used already thanks to the rightful uploader

Be sure you read and understand the information/Version, project ROM backup Firmware and Screenshot image above is same to your device before writing ROM, Do it at your Own Risk!...

FREE TOOL MAY USE
We can use to flash-back this Firmware copy to device via PC/laptop and tools that have PAC image file support load,
Must better use Paid tools which is back-up this ROM If you don't have Paid tool! You can try Upgrade Download. *PAC files Rom is ready to load to SPD Upgrade Tool which is found tutorial at given link

Flashing logs text

-->

Operation : Flash [ v1.27 ]
======= Flash
Files set for flashing :
[ MCU ] : SC77xx Infinity Package
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
 ====  Wait for phone...
Phone found! [ 7 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
[FL] : Enabled NVM update. Will program all NVM images found in FW !
PMTManager : Load 0x1C records
PMTManager : PMT Update Ok!
Flashing now

Update BootCode : u-boot-spl-16k.bin
Write Data ...
Write Data Ok!

Update BootCode : u-boot.bin
Erase block ...
Block erase Ok!
Write Data ...
Write Data Ok!

Write FSImage : prodnv.img
Write Data ...
Write Data Ok!

Write CodeData : sc7731C_CP0_modem.bin
Write Data ...
Write Data Ok!

Write CodeData : DSP_DM_Gx.bin
Write Data ...
Write Data Ok!

Update NVM image : nvitem_w.bin
Update NVM Data Ok!

Erase Block : RuntimeData
Erase block ...
Block erase Ok!

Write CodeData : sc8830g_modem_CP2_WCN_Trunk_W16.32.2_Release.bin
Write Data ...
Write Data Ok!

Update NVM image : nvitem_wcn.bin
Update NVM Data Ok!

Write CodeData : logo_540x960.bin
Write Data ...
Write Data Ok!
Write CodeData : logo1.bin
Write Data ...
Write Data Ok!
Write CodeData : logo2.bin
Write Data ...
Write Data Ok!
Write CodeData : logo3.bin
Write Data ...
Write Data Ok!
Write CodeData : logo4.bin
Write Data ...
Write Data Ok!
Write CodeData : boot.img
Write Data ...
Write Data Ok!
Write FSImage : system.img
Write Data ...
Write Data Ok!
Erase Block : PERSIST
Erase block ...
Block erase Ok!
Write FSImage : cache.img
Write Data ...
Write Data Ok!
Write CodeData : recovery.img
Write Data ...
Write Data Ok!
Erase Block : MISC
Erase block ...
Block erase Ok!
Write CodeData : sysinfo.img
Write Data ...
Write Data Ok!
Write FSImage : userdata.img
Write Data ...
Write Data Ok!
Elapsed: 00:03:34
Reconnect Power/Cable!

Select firmware download which is for CM2 or for SPD free tool below
⇩DOWNLOAD OJOS 6 Pac.sc CM2 Firmware
Extracting file is without a password, Rar Size: 599mb credit to kennyB
LINK1  /  LINK2

⇩DOWNLOAD OJOS 6 PAC for SPD Upgrade Tool credit to saimen
LINK1 / LINK2
Extracting password

www.gsmworldtrick.com