Samsung Tab Firmware model P1000

Sponsor Ads




Samsung Tab Firmware model P1000 Download Rom Update via Odin tools


Procedure
1. After Download the Rom , Download Odin Tools  Here
2. Select and install Samsung driver if you have not Here
3. Open Odin tools and Load Firmware as follow (see figure below)
 
3. Connect your tablet to USB port of computers click Start to flash 
4. After flash the tablet off . wait for 3 minutes then power on if not power.
    press power +volume up+ down then tablet show on screen "unknown power" . wait for 3 minutes then        shut off then on again .
⇩DOWNLOAD NVRAM for Invalid IMEI
Note! Before Writing ROM to device
* HOW TO SAFE FLASH YOUR DEVICE?
* HOW TO DOWNLOAD FIRMWARE?
* ABOUT PRIVACY POLICY/PRECAUTIONS
NOTE: Extract the downloaded compress file and provide given password if asked, Do it at your own risk, After flashed the device is set automatic in reset condition, All your user data is lost.
Make sure you full BACK-UP the device first before to proceed flashing your phone for future purposes.
Previous
Next Post »
0 Comments
Ads responsive Available Here