Samsung SGH-I717 AT&T Firmware

Device problem status bring here by my client "In Hang on Samsung Logo only".
I'll try to Soft reset by but it was failed to show Recovery mode, That's why i proceed to Flash Stock Rom by using Odin Tools. And then the result after flash the firmware to device all is OK.
and the customer feel happy to see her phone live again.


If  you Want the Firmware you can download from HERE.
And also Tools from HERE  or Download tools direct here.
After you download ,Open Odin tools press the PDA tab to Load the Firmware you download earlier then click Start button.
In device you must enable download mode by press hold vol down + power, Then connect to PC/laptop
with samsung original driver you can download Samsung drivers
I hope it will help people related problem when see this post.

See figure below



Flashing stock rom using odin tools


After



Firmware 100% Tested.with No Password.
Finish work on my Mobile Repair Shop.
Share this post.
DOWNLOAD NVRAM FIRMWARE
DOWNLOAD DRIVERS Extract the downloaded compress file using 7 ZIP or winrar and provide given password if asked, Do it at your own risk, After flashing ! the device is set automatic in reset condition, All your user data is lost. Make sure back-up first before to proceed flashing your phone.

A Smartphone Software repairing


ABOUT THIS BLOG PRIVACY POLICY

Previous
Next Post »
0 Comments