Lenovo Meizu A19 Firmware

Figure 1 : Actual unit i repaired back housing view

Firmware infoDevice Brand   : A19
Device Model   : A19
Device CPU     : MT6752
Device IntName : A19
Device Version : 4.4.4
Device Project : ALPS.KK2.MP13.V1.16

This Lenovo model A19 Meizu firmware is MediaTek Android MT6752 system is i already used to flash the said model as system image only using SP flash Tool. you can see the figure 2 below show setting.\

Figure 2 : Sp Tools v5.1532

As we will see the check box system only is only selected to flash the device because there are many version of firmware of this kind of model.
The problem of A19 Meizu that i repaired is Hang on start-up then Restart, But after Flash this firmware proceed to soft reset using combination of keys - Hold power on + volume up in 5 seconds when the recovery appear choose reset to factory reset by navigate volume button.
The firmware is not backup of mine, thanks to bulilit000010 that when i search on net i see the comparison of name i search, The download links where the firmware located is credit to them

Download : A19 Meizu
Download Mobile Tools : Select here
Download Phone driver :  Select here
To Download allow ads pop-up just wait 5 seconds and skip or press X
Do it at your own risk, After flashing ! the device is set automatic in reset condition, All user data is lost.

Make sure back-up important data before to proceed flashing your phone.
Subscribe on Circle Below

Yes please! If you subscribe you will receive news and update about new firmware and tools.
NOTE: Extract the downloaded compress file and provide given password if asked, Do it at your own risk, After flashed the device is set automatic in reset condition, All your user data is lost. (Make sure full back-up the device first before to proceed flashing your phone for future purposes).
Next Post »
3 Blog Comments

How do we flash it... it seems could'nt flash i've correctly installed the driver!... it's not to run up... there's some error on the files yet... please let me know by this


1. connect phone in PowerOFF pcUsb port while holding boot VOL + and VOL - and PC is asking for driver and download 1.Manual MTK Drivers CDC+VCOM+ADB+BROM preloader OR 2. auto installer MTK_USB_All_v1.0.1.zip from
http://phoenixemer.blogspot.com/p/smartphone-and-android-driver-this-type.html windows version,
2. if you success install driver see device manager port if have name MTK preloader VCOM like that listed in PORTS, If dont have ,your phone not connected may be usb/cable charging port of your phone damage.
3. if succesful detected there sound connecting device you hear,reconnect now follow this post i only flash system only
4. let me know the problem of phone?


updated tutorial read here

Ads responsive Available Here