QNET TIGGO Firmware Back-up BIN files

Qnet mobile model Tiggo, Android Smart phone with Os version 4.4.2 Spreadtrum Firmware is here.
This device have no Recovery mode to reboot factory reset mode.
But there's have calibration boot mode without factory setting that's why it's difficult to reset the device.
The modem base i read in about phone modem menu is DM BASE 12A W13.39 SC7731G_MODEM 09292015.
The figure below was the unit after successful reset factory i already backup as BIN file using miracle tools.

Figure 1: Front

Figure 2: Back cover

Figure 3: Miracle tools Backup

A total of 264 mb NAND type flash BIN FIRMWARE can use to write flash back using miracle tools.
You must set the tools to SPD tab>Read menu > set to choose type boot to SPD8810/6820 then hit start flash by using USB mode.
QNET TIGGO Firmware Back-up BIN files is can use to same model about have problem about software related problem Hang, no power, password, pattern lock , anything about software related.
Do it at your own risk, After flashing ! the device is set automatic in reset condition, All user data is lost.
Make sure back-up important data before to proceed flashing your phone.

Download Firmware : Click here
Download Password : Click here
Download Mobile Tools : Select here
Download Phone driver : View
To Download allow ads pop-up just wait 5 seconds and skip or press X
Subscribe on Circle Below
Yes please! If you subscribe you will receive news and update about new firmware and tools.

NOTE: Extract the downloaded compress file and provide given password if asked, Do it at your own risk, After flashed the device is set automatic in reset condition, All your user data is lost. (Make sure full back-up the device first before to proceed flashing your phone for future purposes).

A Smartphone Software repairing

Next Post »
2 Blog Comments

If read description, the ROM is SPD6820 chipset. of course the driver is spreadtrum

Spreadtrum usb Flashing driver
1.SPRD3 Drivers (CM2)
2.SPRD NPI USB Driver production line version.rar
3.SCI usb2serial flashing spreadtrum chipset
for me i use no. 3

Ads responsive Available Here