Alcatel Firmware One touch upgrade Download Tool version S 4.2.7

ONETOUCH Upgrade is a tool that helps you update your Alcatel mobile phone software with your personal computer. Operation System: Windows 2000 / XP / 2003 / Vista /Win 7 / Win 8
and stable internet connection must need......

This is credit to
http://support1.alcatelonetouch.com/global-en/upgradeSoftware

Test and Procedure

Once you have problem related on software problem Hang, no power, password, pattern lock , anything about software related, You can use this tool as live update by using this tool via internet connection
The figure Below illustrate picture sample i test for POP D3 model

Figure 1


First, before start flash your phone need to prepare

  • Battery atleast 50% charge
  • Stable PC power and good USB cable
  • Stable and strong Internet connection
  • Be sure you select proper model
  • BACKUP your important data after flash it restore to factory default
  • Do it at your own risk
To install ALCATEL Mobile Software Upgrade, your PC must has the following system requirements at least: 

  • CPU: Equal to Pentium 300 MHZ or above. 
  • RAM: 128M or above. 
  • Hard Disk: 200MB or above. 
  • Operation System: Windows 2000 / XP / Vista. 
  • USB port. 
  • Internet connection.
  • Support ALCATEL phone model:
  • One Touch 890
  • To connect your phone with your PC, you need the following product:
  • One normal USB data cable. 
Warning Page

Before starting the One touch Upgrade S application, we suggest you check the warning message in this page.

Figure 2

1. Please switch off your phone.
 2. Please don't connect your phone to computer before starting the upgrade process.
 3. Please ensure that your phone's battery is fully charged in order to ensure that the battery does not run out of power during the upgrade process.
 4. Upgrade process will erase all your information in the phone. Before you start the application, we suggest you to backup all your personal information in the phone by ALCATEL PC Suite. 
You can find the ALCATEL PC Suite by below website. 
http://www.alcatel-mobilephones.com/
 5. After the upgrade process has finished, the phone will be reset to default setting. If your phone is default locked with Operator's SIM card, you may need to unlock your phone again.

Check Available Software Upgrade Package  

Now you can use the One touch Upgrade S to upgrade your mobile phone software. Please don't connect your mobile phone to PC at first.

Step 1. Long press the phone's DIAL and Power key at the same time and keeping it pressed over 2S.
For different model type, the download key is different.         

Step 2. Plug in the USB cable to handset's USB port, connect the mobile phone to computer. One touch Upgrade S will scan your mobile phone and read some information from the handset for authentication.

Figure 3


If the available software package upgrade checking process finish successfully, you will be informed result as below. Unplug the mobile phone from.computer before you go to next step. It is mandatory to start the mobile phone software upgrade process.

Summary how to upgrade your phones
Install the tools and lunch it, select your model brand in list.
Then connect phone in power off condition to usb PC port the tools automatic install driver
and give you prompt step by step how to start upgrading your alcatel phone. And the last if starting upgrade as you seen Figure 1 above leave it an hour until see this

Figure 4 Finish flashing..



NOTE: Extract the downloaded compress file and provide given password if asked, Do it at your own risk, After flashed the device is set automatic in reset condition, All your user data is lost. (Make sure full back-up the device first before to proceed flashing your phone for future purposes).

A Smartphone Software repairing

Previous
Next Post »
0 Comments
Ads responsive Available Here