Samsung gt-E2222 Firmware

Old phone bring by customer with a problem of  hang and blinking logo on samsung was fix

This two image that show of phone and tools was used to revive the device



 

Step how to do it?

1. Download the firmware rar file and extract  > Samsung E2222 Firmware
2. Download the tools  Flash loader 7.4.7 
3. Download the Driver  Sunstone_V5_00_0_1_WHQLed
4. Open Tools and click set model see figure above #1
5. Browse the TFS file in folder firmware figure above #2
6. Browse the CSC file in folder firmware figure above #3
7. Press Start  button to begin to flash phone see figure above #4
8. Connect the phone via usb port PC without Battery while press holding the two keys 4 and 5 in keypad button of  phone.
Note: Be sure you installed proper driver before you start procedure.
You can see on log window tab when start flashing

DOWNLOAD NVRAM FIRMWARE
DOWNLOAD DRIVERS Extract the downloaded compress file using 7 ZIP or winrar and provide given password if asked, Do it at your own risk, After flashing ! the device is set automatic in reset condition, All your user data is lost. Make sure back-up first before to proceed flashing your phone.

ABOUT THIS BLOG PRIVACY POLICY

Previous
Next Post »
1 Komentar