Meetuu R5 Firmware (Sony meetuu r9t) ROM ALPS.KK1.MP7.V1

Hello, Today i share the Meetuu model SONY R5 Firmware back-up via CM2 MTK module as scatter file.
The information below shows what Meetuu model R5 Firmware about.

Brand          : meetuu
ProdName   : r9t_gxi_mul
ProdModel  : Android
Device         : r9t_gxi_mul
AndroidVer : 4.4.2
MTKxCPU  : MT6571
MTKxPRJ   : ALPS.KK1.MP7.V1

MODEM :
BaseBand  : MT6571_S00_MOLY_WR8_W1328_MD_TG_MP_V22_1_tg_n

EXTRA :
LCD [0] : otm9608_dsi_6571_qhd
LCD [1] :  otm9605_dsi_6571_qhd
LCD Res : 960x540
TOUCH [0] : GT9XX_GES

Next information as a LOGS text that shows about backup info

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 13 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6571
BB_CPU_NME : [MediaTek] MT6571_S00
BB_CPU_EXT : 0xCA00 , 0x8D00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8B
NAND Flash : NOT INSTALLED
eMMC Flash : 700100533130303034081D3299F1A101
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 40001
[eMMC] : FLASH_CID : 700100533130303034081D3299F1A101
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E4000000
[eMMC] : FLASH_UCP : 3648 MiB [eMMC 4 GiB]
DEV RID    : 0xDABB189F4C9E6F22AA4E48402332D473
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

Brand     : meetuu
ProdName  : r9t_gxi_mul
ProdModel : Android
Device    : r9t_gxi_mul
AndroidVer: 4.4.2
MTKxCPU   : MT6571
MTKxPRJ   : ALPS.KK1.MP7.V1

[Read Ok] : preloader_r9t_gxi_mul.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6571 / V1.1.1 / r9t_gxi_mul / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 835 MiB
Scatter saved to : C:\Documents and Settings\emerlits\Desktop\CM2 backup\MT6571__meetuu__Android__r9t_gxi_mul__4.4.2__ALPS.KK1.MP7.V1\

-------------------------------------------------------------------

As we see the backup information using CM2 mediatek tool that what version, device product and project.

We can use flash back this Firmware Rom via PC and tools that have scatter file support like sp flash tool, Must better use CM2 tools which is back-up this ROM

If you dont have CM2, You can use SP flash tool read more step by step and download HERE

NOTE: After Flashing The phone have pattern lock, Make it Hard reset the phone or use paid tool to remove it or make it hard reset using Recovery mode to remove old user data of phone.

Be sure you read and understand the info backup Firmware before proceeding to program your device

Firmware can use to same model about have problem about software related problem Hang, no power, password, pattern lock , infected by virus, anything about software related.

Best safe way is manual select flash the SYSTEM ANDROID file only.

Do it at your own risk, After flashing ! the device is set automatic in reset condition, All user data is lost.

Make sure back-up important data before to proceed flashing your phone.

Download This Firmware

Drive 333mb

Password

View

uploading

1. To Download allow ads pop-up of your browser

2. Wait 5 seconds and press skip button, The new Tab of  browser appear that show your link

3. Subscribe on my blogs