Asus ZC500TG Uptade Firmware via SDCard

Sponsor Ads





This Asus ZC500TG Firmware ROM was tested to said model name Asus ZC500TG
The firmware is 100% tested and the problem of mobile hang on logo on startup was repaired after i flash using Update firmware via SD Card .
The Firmware ROM I download is stock ROM and complete set inside folder
Thanks toUploader who's shared this ROM, Without this i can't revive the problem of this device

 Procedure how to flash the Firmware Rom via SDCard

1 Prepare an SD card, it is recommended to use Sandisk, Kingstone or Kingmax, size is  recommended     that  more than 1Gb. Formatting SD card (optional).
2 Copy the “UL-zc500tg_asus_z00vd-ww-12.1.0.25-user.zip” folder to the external SD card’s root directory
3. Go to recovery mode by pressing together vol.+,power button
4. Then after no command appear press simultaneously volume up,volume down,or press volume down or power
5. In the menu ,select apply update from sdcard then select update zip
6  Just wait till complete flashing as shown above
7. Reboot device, wait to 5-10 minutes to fully recover your phone
8. Done

Download This Firmware

LINK

1. To Download allow ads pop-up of your browser
2. Wait 5 seconds and press skip button, The new Tab of  browser appear that show your link
3. Subscribe on my blogs.
Ads
⇩DOWNLOAD NVRAM for Invalid IMEI
NOTE: Extract the downloaded compress file and provide given password if asked, Do it at your own risk, After flashed the device is set automatic in reset condition, All your user data is lost.
Make sure you full BACK-UP the device first before to proceed flashing your phone for future purposes.
Previous
Next Post »
0 Comments
Ads responsive Available Here