Cherry Mobile Flare J2 DTV Firmware ROM

This Cherry Mobile Flare J2 DTV Firmware Rom is back-up using CM2 Spreadtrum tool 

And perform by me and already convert to PAC files 

For helping others who need this Firmware without CM2 spreadtrum tools FREE!

The PAC files Rom is ready to load to SPD_Upgrade_Tool_R17.0.0001

which a free tool can be download below post.
The figure image on top picture shows the actual unit of Cherry Mobile Flare J2 DTV

Which the firmware was backup using CM2 read/convert to PAC image firmware button.

Here some Logs may viewers will need to understand what Backup ROM about using CM2.

---------------

==== Wait for phone...
Phone found! [ 61 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...

Phone found! [ 61 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...

Phone found! [ 61 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : pike_xx08
Model Brand : cherry_mobile
Model Device: Flare_J2_DTV
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : Cherry_Flare_J2_DTV_091416_V01
Model Ext : Flare_J2_DTV
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 2137 MiB
Saved to : SP7731CEA_Flare_J2_DTV_6.0_Cherry_Flare_J2_DTV_091416_V01_Flare_J2_DTV\
Done!

------------------

Cherry Mobile Flare J2 DTV Firmware Rom is a stockrom which already hard reset before backup.

Before i was backup the ROM, The problem of this unit is google verification.
AKA FRP problem,

Its totally remove the FRP condition via CM2 tools and after successful test,

I backup as pac.sc and i said before i convert it into PAC file image.

We can use to flash-back this Firmware Rom via PC/laptop and tools that have
PAC image file support load,

Must better use CM2 tools which is back-up this ROM
If you don't have Cm2, You can use try Upgrade Download,

Read more step by step about what Free Tools and download at Link below

SPD_Upgrade_Tool_R17.0.0001

Be sure you read and understand the info backup Firmware

and step by step before proceeding to program your device.

Firmware can use to same model about have problem about software related problem Hang, no power, password, pattern lock , infected by virus, anything about software related.
Best safe way is manual select flash the SYSTEM ANDROID file only.
Do it at your own risk,
After flashing ! the device is set to automatic in reset condition,
All your user-data is lost.
Make sure back-up important data before to proceed flashing your phone.

Download This Firmware

Firmware PAC image Size : 2137 MiB extracted

The file is split into 2 parts because of large file

Download Part 1
Download Part 2

Place the two parts inside folder directory then extract it
This Rare ROM is FREE ! no password
That's all! i go now and get some drinks ^_^

1. To Download allow ads pop-up of your browser

2. Wait 5 seconds and press skip button,

The two new Tab of  browser appear

Other 1 that show your link and other 1 is ads

3. Subscribe on my blogs