HOME OF FIRMWARE DOWNLOAD FREE!

LG SP200 Unlock Firmware and backup


There are two types how to Unlock SIM network of this device LG SP200
1. Using OCT firmware from Octopus Box...
2. Using  LGUP Firmware using free tools...

1. LG Tool Octopus V2.8.9.8 Warning!

Writing phone firmware without real necessity is at your own risk.
Downgrade may lead to phone damage!
Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!

Write Firmware Done Logs!

Opening "SP20013b_to_X210ULMA10d_for_unlock.oct". OK
Setting options...12/6/2018 7:07:16 PM > OK
Reading partitions.. OK
Formating USERDATA..OK
Formating ENCRYPT..OK
Sending signature..OK
Writing preloader...12/6/2018 7:07:27 PM > OK
Writing pgpt...12/6/2018 7:07:27 PM > OK
Writing lk...12/6/2018 7:07:28 PM > OK
Writing lk2...12/6/2018 7:07:28 PM > OK
Writing laf...12/6/2018 7:07:30 PM > OK
Writing boot...12/6/2018 7:07:31 PM > OK
Writing recovery...12/6/2018 7:07:32 PM > OK
Writing logo...12/6/2018 7:07:33 PM > OK
Writing lo_bak_go...12/6/2018 7:07:33 PM > OK
Writing secro...12/6/2018 7:07:33 PM > OK
Writing tee1...12/6/2018 7:07:33 PM > OK
Writing tee2...12/6/2018 7:07:33 PM > OK
Writing rct...12/6/2018 7:07:33 PM > OK
Writing factory...12/6/2018 7:07:34 PM > OK
Writing efuse...12/6/2018 7:07:34 PM > OK
Writing md1img...12/6/2018 7:07:35 PM > OK
Writing md1dsp...12/6/2018 7:07:35 PM > OK
Writing md1arm7...12/6/2018 7:07:35 PM > OK
Writing md3img...12/6/2018 7:07:36 PM > OK
Writing system...12/6/2018 7:15:57 PM > OK
Writing lafbak...12/6/2018 7:16:00 PM > OK
Writing sgpt...12/6/2018 7:16:00 PM > OK
Writing ftm...12/6/2018 7:16:01 PM > OK
Writing cache...12/6/2018 7:16:03 PM > OK
Writing OP...12/6/2018 7:16:20 PM > OK
Writing userdata...12/6/2018 7:16:49 PM > OK
Formating RCT...12/6/2018 7:16:53 PM > OK
Finalizing...12/6/2018 7:16:55 PM > OK
Performed by 2.8.9.8 Software version.
Elapsed Time: 12:07:58 AM


Write EEPROM Logs

Sending Open.. OK
Opening "SP200_35!!!!!!!!!!49_06-12-2018_16-17-03.eep".. OK
Writing EEPROM...
Reading 1b...
Sending sign...
Sending write cmd...
Writing cmd...
reading cmd...
Read: EXEC...
Reading all data...
Sending Open.. > OK
EEPROM succesfully repaired.
Performed by 2.8.9.8 Software version.



DOWNLOAD REQUIRED FILE TO UNLOCK SP200 using Octopus
OCT file Drivers Download Octoplus LG ToolV2.8.9.8


Watch Video below...unlocking using Octopus LG tool



I heard this test firmware from Octopus for unlocked facing a problem like restarting or Hang after a flash.
2. ALTERNATIVE Flashing using LGUP (free tool)

The problem is not all device supported by firmware, Because of a different variant, Advice to backup full firmware using octopus before you flash this firmware.

If you already flash the firmware without full backup, This link maybe help to recover your phone status.

Check this LINK Credit to MIXTOR001



If you failed this Procedure using Octopus file, The device in your hand is a different variant which is not supported, To fix boot loop issue, You need to full flash your SP200 using KDZ which is converted to LG X210U you can follow the Link message reply on Post Sprint LG Tribute Dynasty.

HAPPY UNLOCKING...

LGUP Tool X210 Zip password: mw2015
KDZ file       : X210ULMA11a_00_NAO_US_OP_0921.kdz

DOWNLOAD:
LGUP KDZ file
NOTE: Before Writing ROM to your device, Extract the downloaded compressed file and provide given password if asked, Please read first the (How to safe flash/Reprogram your device?) Do it at your own risk, After flashed the device is set automatic in reset condition, All your user data is lost. Make sure you full BACK-UP the device first before to proceed flashing your phone for future purposes.

Feel free tell to Admin about Invalid / Missing Download Link, Admin will FIX problem as soon as posibble... Some question will help you about (How to Download Firmware and password?) You can contact us at a main page with author Gmail,FB for fast response..

Comments

  1. hola,

    Sp200 The phone restarts after flash
    1. Install this test Software version v2.8.9.5. (OK done)
    2. Fully charge phone's battery. (OK done)
    3. Read EEPROM Backup. (OK done)
    4. Select SP200 and write "SP200.._for_unlock" firmware (OK done)
    5. Put the phone into Download (Emergency) Mode AND write EEPROM Backup, this is important! (OK done)
    - Hard Reset ok
    - Imei ok
    - Signal ok
    - But the phone restarts constantly.

    ReplyDelete
  2. I heard this test firmware for unlocked facing a problem like restarting or Hang after a flash.
    1. the problem is not all device supported by firmware, Because of a different variant, Advice to backup full firmware using octopus before you flash this firmware.

    2. if you already flash the firmware without full backup, This link maybe help to recover your phone status
    http://forum.gsmhosting.com/vbb/f799/sp200-unlock-success-2503404/#post13458025
    Credit to MIXTOR001
    Hope it helps BR.ADMIN

    ReplyDelete
  3. Besides the lg octopus and firmwar, Do i need a box to unlock the lg sp 200?

    ReplyDelete
  4. Hello, everyone, You do not need a BOX, Just use LGUP developer's PARITION DL feature to flash X210ULMA firmware ver. 11d ONTO your SP200 phone.

    ReplyDelete
  5. https://www.mylgphones.com/sprint-lg-tribute-dynasty-sp200-firmware.html

    ReplyDelete
  6. How to backup eeprom without box

    ReplyDelete

Post a Comment

Important Parts Using of Mobile Tech.

Latest Video Post